creatorpolt.blogg.se - A1354 apple

A1354 apple manual#
A1354 apple password#
A1354 apple mac#

Make changes to passwords or any other settings you require, then click Update.

A1354 apple password#

If you turn on encryption, enter a new password for your network.

Turn encryption on to activate password protection for your network.

IP address: Unless you've been given an IP address by your Internet service provider or system administrator, do not change the IP address.

Open AirPort Admin Utility for Graphite and Snow 4.2.5 to reconfigure the base station.

From Wi-Fi status menu, choose the network created by the base station.

A1354 apple manual#

You can connect to the reset base station using the following manual network settings on your computer:.The base station password is set to "public" and the IP address is reset. The middle LED will blink once every second while the device is in soft reset mode. Hold down the reset button for 1 second.Locate the reset button on the base station, next to the ports. When instructed to do so, press this button with a pen or straightened paperclip. If you're using an AirPort Graphite or AirPort Snow (Dual Ethernet) base station, connect your computer directly to the base station using an Ethernet cable. You can then use AirPort Utility to reconfigure the base station. Wait about a minute for the base station to finish restarting.While holding down the reset button, connect the base station to power and continue to hold the reset button for about 6 seconds, until the status light on the base station flashes amber rapidly.Disconnect the base station from power.When AirPort Utility indicates that setup is complete, click Done.įactory-default reset, available only with firmware version 7.9.1 on AirPort Time Capsule 802.11ac and AirPort Extreme 802.11ac:.Click ”Restore previous settings,” then click Next until you get to the final window.Click the Other Wi-Fi Devices button, then select your base station from the list.Press and hold the reset button for about 5 seconds, until the status light on the base station flashes amber rapidly.You can now change the password or reconfigure the base station as needed. Click the icon for your base station in AirPort Utility, then click Edit from the pop-up menu.Open AirPort Utility, which is in the Utilities folder of your Applications folder.From the Wi-Fi status menu in the menu bar, choose the Wi-Fi network created by your base station.

The status light on the base station flashes amber. Press and hold the reset button for 1 second, then release the button.Make sure that the base station is connected to power.When instructed to do so, press this button with a pen or straightened paperclip. Locate the reset button on the base station, next to the ports. You may then use the device in its default state or reconfigure it using AirPort Utility.īefore resetting your base station, it's best to make sure that its firmware is up to date, if possible. The base station won't be visible in the Wi-Fi status menu or AirPort Utility for up to a minute.

A1354 apple mac#

The base station network name is set to "Apple Network," followed by the last six digits of the base station's MAC address.The base station name is set to "base station," followed by the last six digits of the base station's MAC (Media Access Control) address.The base station password is set to "public.".The base station is set to request an IP address by DHCP.

When performing a hard reset or factory-default reset: (This does not erase data stored on the built-in hard drive of a Time Capsule, or on any external hard drive connected to the base station.) Perform this reset if you're selling or giving away your base station. Factory-default reset: Like a hard reset, but removes any saved configurations and profiles.Perform this reset when the base station is unresponsive, or you're troubleshooting network issues that aren't resolved by other means.

Hard reset: Resets the base station to an unconfigured state, but retains the last saved configuration and any profiles, allowing you to restore your base station from previous settings.

Soft reset: Resets the base station password and disables security (Access Control and RADIUS settings) for 5 minutes so that you can join the network to make changes. If you make no changes within 5 minutes, the base station reverts to its former settings. Perform this reset if you can't administer the base station because you forgot its password.

Depending on the base station model, you can perform one or more of these types of resets: Resetting your AirPort base station restores it to a state that allows you to regain control of it when you lost the base station password or the base station isn't responding as expected.